Volkswagen Beetle Steering and Suspension Parts

Empi Steering Box

Manufactured in Brazil in an ISO 9001 Certified Facility Using All New Components. These Steering Boxes Have Been Installed, Tested and Proven on EMPI's Fleet of Type 1 and Type 3 VW's All Units are Filled with the Proper Amount and Grade of Grease.

Type 1 50-77 Exc. Super Beetle
Ghia 56-74
Type 3 62-73 T
Thing ( Type 181 ) 73-74

Front Sway Bar Mounting Kit
Complete Set

VW Beetle (Standards) 66-77
VW Karmann Ghia 66-74
VW Thing 73-74

King Pin Rebuilding Kit, Made in Germany

1946-1965 VW Beetle
1956-1965 VW Karmann Ghia

 

Link Pin Rebuilding Kit, Made in Germany

1946-1965 VW Beetle
1956-1965 VW Karmann Ghia

 

REAR Z-BAR ANTI ROLL BAR SUPPORT LINK ROD - LEFT SIDE -

BEETLE 68-77 WITH SWINGAXLE TRANSMISSION
67-74 GHIA

Spacer Sleeve, Long, Top of Steering Shaft

VW SuperBeetle 1974-79
VW Karmann Ghia 1974

From VIN 1X4 2353465

Steering Damper (Brazilian).

1971-74 Super Beetle

Steering Shaft with U-Joints

1971-1974 Super Beetle

 

Tie Rod End Boots
Set of 4

VW Beetle and VW Super Beetle 66-79
VW Karmann Ghia 66-74
VW Bus 66-79
VW Vanagon 80-92
VW Type 3 62-74
VW Thing 73-74

Bushing, Sway Bar, Outer, Sold Individually

1974-1979 Super Beetle

 

Idler Arm Steering Damper Bushings PAIR
OEM German

VW Beetle and VW Super Beetle 60-79
VW Karmann Ghia 56-74
VW Bus 55-79
VW Type 3 62-73

This is a stabilizer bushing. It is pressed into the right (passenger) side tie rod
where the stud on the steering stabilizer passes through. It helps to minimize
vibration in the front end by cushioning the contact point between the two metal
surfaces and absorbing some of the shock from uneven road conditions.

Urethane control arm bushing kit. 15 piece set.

VW Super Beetle 1971-73 up to chassis #1_3 3003655

CHASSIS INSPECTION COVER

1965-77 STD Beelte
1965-77 Ghia
1965-77 Thing

Front Axle Beam. Equal to Original German Quality.
Standard Style With Bearings

VW Beetle (Standard) 1966-78
VW Karmann Ghia 1966-74

2 1/2 Drop spindles For use with LUG PATTERN 4/130 & 5/130 Disc Brakes.

EMPI drop spindles are brand new units, not re-manufactured old cores! CNC machined to exact tolerances. These forged drop spindles feature 1/4" outwards offset. Clearance is usually not an issue. Made only for the 4-lug VW (4/130) and 5-Lug Porshe (5/130) disc brake applications. These spindles are the first step to a brake system upgrade while giving you the built-in ability to lower your car an automatic 2 1/2" just by bolting them on. Ball joint spindles require 69-on style tie rod ends. Uses original steering geometry so the ride and handling of the car is not negatively effected.

VW Stock Ball Joint Spindles. New, Pair. A welcome addition when rebuilding your ball joint front end with disc brakes.These all new forged spindles are precision ground and accept 68-on bearings and seals. The left side is drilled for the speedo cable.

These spindles will work with pre 1973 Karmann Ghia rotors and calipers.
These spindles will NOT work with Beetle drum brakes These spindles will NOT work with disc brake conversion kits!

Steering Rack Boot

1975-1979 VW Super Beetle

Front Swaybar for ball-joint suspension

1966-78 VW Standard Beetle
1966-1974 Karmann Ghia

Ghia Steering Gearbox Plug

1961-79 Beetle
1961-74 Ghia

Illustrated Step by Step Instructions on Steering Wheel:
Removing and Installing: Horn Button, Steering Wheel,
Steering Column and Tube

Useful for all air cooled VW

Center Tie Rod with Ends(Drag Link)

1971-74 Super Beetle

Ground Strap for Steering Shaft Coupler

VW Beetle (Standards) 1946-77
VW Thing1973-74