EMPI 1776cc Long Block Engine
EMPI Long Block Engines are hand assembled in Southern California
with ALL NEW ALL EMPI matched and approved components by VW racing
legend Jack Sacchette.
Available in three standard configurations for Type 1 or 2
applications. No core required, no long lead times-get your Classic
VW back on the road today!
Every EMPI Long Block comes with a 12 month Unlimited Miles
warranty. EMPI Long Blocks are assembled with name brand components
from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT,
Mahle, Manton, Silverline and Schadek 1776cc Long Blocks include
new AutoLinea-EMPI HD aluminum cases and EMPI High Performance
cylinder heads with S/S valves, chromoly retainers and EMPI
proprietary 3 angle valve job performed on a Rottler valve machine
at EMPI in Anaheim, California. All EMPI Long Blocks are
palletized, shrink-wrapped, crated and ready to ship. NOTE:
Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in
Sand Seal Pulley Kit. EMPI PART NUMBER- 98-0482-B ENGINE CASE-
AutoLinea-EMPI, H.D. Bubble Top Engine Case CRANKSHAFT- Direct
Drilled, 69mm Stroke RODS- OE Specification CAMSHAFT- Stock Cam,
.334" Lift, 250 Duration LIFTERS- Precision Ground and Heat
Treated, 28mm FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm GLAND NUT-
Chromoly, Heavy Duty MAIN BEARINGS- Standard, Steel Center ROD
BEARINGS- Standard CAM BEARINGS- Standard Thrust OIL PUMP- Schadek,
26mm with Cover HEAD STUDS- Chromoly, 8mm with Nuts PISTONS &
CYLINDERS- OE Specification, 90.5mm Bore, 7.2:1 Compression Ratio
PUSHROD TUBES- Stock Style HEADS- EMPI High Performance Dual Port
Cylinder Head, 90.5 / 92mm Bore, 35.5 Intake x 32mm Exhaust S/S
Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle
Valve Job Completed on Precision Rottler Seat & Guide Machine at
EMPI Anaheim PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035"
Wall Thickness ROCKERS- High Performance, Stock 1.1:1 Ratio VALVE
COVER- Stock Steel Style, Black GASKETS- Elring Engine Gasket Set
Have a question?