Karmann Ghia Suspension Parts

VW Beetle 46-58
VW Karmann Ghia 56-68
VW Bus 50-68
VW Type 3 62-68

not for 1968 autostick transmission cars.

For VW Beetle 50-68
VW Bus 50-67
VW Karmann Ghia 56-68
VW Type 3 62-68
VW WEstfalia Camper 55-67

VW Beetle 48-65
VW Karmann Ghia 56-65

VW Beetle 66-77
VW Karmann Ghia 66-74

VW Beetle and VW Super Beetle 69-79
VW Karmann Ghia 69-74
VW Type 3 68-73
VW Thing 73-74

VW Beetle and VW Super Beetle 68-79
VW Bus 68-79
VW Karmann Ghia 68-74
VW Type 3 68-73
VW Vanagon 80-91
VW Thing 73-74

This circlip is used on the ends of the axle shaft to prevent the axle shaft from slipping through and falling out of the CV joint.

VW Beetle and VW Super Beetle 66-79
VW Karmann Ghia 66-74
VW Thing 73-74
VW Type 3 66-73

Front Axle Beam Mounting Bolt for following:
VW Standard Beetle 1946-1977
VW Karmann Ghia 1956-1974
VW Thing 1973-1974

Shock Absorber Mounting Bolt for following:
VW Beetle 10/52-5/59 (upper and lower)
VW Karmann Ghia 1956-5/59 (upper and lower)
VW Bus 1950-1967 (lower only)

VW Beetle and VW Super Beetle 66-79
VW Karmann Ghia 66-74
VW Type 3 62-73

VW Beetle 49-65
VW Karmann Ghia 56-65
VW Type 3 62-65

VW Beetle 49-65
VW Karmann Ghia 56-65
VW Type 3 62-65

VW Beetle 46-65
VW Karmann Ghia 56-65
VW Type 3 62-65

Note: One unit. Two required per side.

VW Beetle 50-65
VW Bus 64-67
VW Karmann Ghia 56-65

VW Beetle 46-77
VW Karmann Ghia 56-74
VW Bus 50-79
VW Type 3 62-73
VW Thing 73-74

VW Beetle 49-66
VW Karmann Ghia 56-66
VW Bus 50-63
VW WEstfalia Camper 55-63

VW Beetle 46-77
VW Karmann Ghia 56-74
VW Type 3 63-73

VW Beetle and VW Super Beetle 69-79
VW Karmann Ghia 69-74
VW Type 3 68-73
VW Thing 73-74

VW Beetle and VW Super Beetle 60-79
VW Karmann Ghia 56-74
VW Bus 55-79
VW Type 3 62-73

This is a stabilizer bushing. It is pressed into the right (passenger) side tie rod
where the stud on the steering stabilizer passes through. It helps to minimize
vibration in the front end by cushioning the contact point between the two metal
surfaces and absorbing some of the shock from uneven road conditions.

VW Beetle 1954-65
VW Karmann Ghia 1956-65
VW Bus 1955-63

Install between the trailing arms, on the posts of the front beam.
Keep suspension from bottoming out.

VW Beetle 1950-1968
VW Karmann Ghia 1956-68
VW Bus 1950-63 up to chassis 1144281

VW Beetle & VW Super Beetle 1968-79
VW Karmann Ghia 1968-74
VW Type 3 1968-73

also fits 1968 with autostick

VW Beetle (Standards) 50-77
VW Karmann Ghia 56-74
VW Thing 73-74

Install between the body and the front axle beam to prevent vibration

VW Beetle and VW Super Beetle 1956-79
VW Karmann Ghia 56-74
VW Type 3 all
VW Thing 1973-74

These pads sit between the body and chassis and help absorb road vibration

VW Beetle (Standard) 1966-78
VW Karmann Ghia 1966-74

EMPI drop spindles are brand new units, not re-manufactured old cores! CNC machined to exact tolerances. These forged drop spindles feature 1/4" outwards offset. Clearance is usually not an issue. Made only for the 4-lug VW (4/130) and 5-Lug Porshe (5/130) disc brake applications. These spindles are the first step to a brake system upgrade while giving you the built-in ability to lower your car an automatic 2 1/2" just by bolting them on. Ball joint spindles require 69-on style tie rod ends. Uses original steering geometry so the ride and handling of the car is not negatively effected.

VW Beetle (Standards) 1966-77
VW Karmann Ghia 66-74

All VWs

Note: an occasional cv is 6 point.

VW Beetle and VW Super Beetle 60-79
VW Karmann Ghia 60-74
VW Type 3 62-73
 

VW Beetle and VW Super Beetle 66-79
VW Karmann Ghia 66-74
VW Bus 66-79
VW Vanagon 80-92
VW Type 3 62-74
VW Thing 73-74