Volkswagen Bus, Vanagon, Eurovan Tools

Seat Cover Tool Kit: Hog Rings and Pliers

These hog rings and pliers make installing seat covers a cinch. Recommended for all Volkswagen vehicles.

ARROW RIVET TOOL KIT RL100 rivet tool is built to last Durable all-steel construction with a - comfortable hi-vis vinyl grip Spring loaded handle makes for easy loading Includes two interchangeable nose pieces & - 25 ea. 1/8" & 3/16" medium aluminum rivets Includes custom molded case for easy storage and 50 of our two most popular rivets 25 each of 1/8 medium rivet and 25 each of 3/16 medium rivets.

Case Splitting Tool

After you remove the oil pump, install this handy device into the pump opening up against the cam gear. (Make sure it doesn't touch the gear.) Adjust the bolts and you'll see the tool move outward. This puts pressure from the inside out and pushes the case halves apart. Now, that sure beats hammering on the engine case to split it apart.

Works on VW Bug, Bus, Ghia, and Thing.

Torque Multiplier Kit

Remove even the toughest flywheel gland nuts or frozen axle nuts with the torque multiplier kit. Apply 30 ft./lbs. of torque to this tool and it transforms it into 270 ft./lbs. of torque at the gland nut! In fact, when tightening, be sure to use a proper torque wrench as this tool will OVERTIGHTEN bolts and breakage can occur.

This tool works on all 12 1600cc engines with stock-size 36mm glandnut and 36mm drum axle nuts with 12mm bolts. It's invaluable to anyone doing brake or engine work. The kit includes the torque tool and drum plate as well as 6-volt and 12-volt flywheel gears. Perfect fit for Bug, Bus, Ghia, Thing

VW Bench Mount Engine Stand, Classic Volkswagen Bug Bus Ghia Type 3 Mounts to work bench
Features swivel head. Use for holding engines or transmissions
1 5/8" male tube that slides into mount

Crankshaft Gear Puller - A professional quality tool will solve the problem of removing the crankshaft timing gear- a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation this tool simply slips under the gear and with a wrench or impact gun the gear is easily removed. The highest quality standards are used in the construction of this tool for years of service for the do-it-yourself or the professional. Fits all 12-1600cc Beetle style engines- does not fit the larger 17-2000cc type 4 engines. Note DO NOT FORGET to remove the snap ring on the end of the crankshaft before using this puller as this is a sure way to ruin this gear puller and void your warranty.

Deluxe Flywheel Main Seal Tool For Vw Bug / Vw Beetle 1600CC Based Air-cooled Engines. Provides Proper And Even Pressure On The Flywheel Main Seal During Install.

Heavy Duty Floor Dolly Features Heavy Gauge Steel For Strength And 4 Industrial Swivel Casters For Stability. Roll-A-Round Engine Stand Allows Easy Engine Installation With Floor Jack For Vw Bug / Vw Beetle 1600CC Air Cooled Engines.

ONE YARD OF SMOOTH GRAIN VINYL MATERIAL (SOLD ONLY IN FULL YARDS)

VW Crank & Flywheel Jig 8 Pin Positioning Tool mounts to the flywheel or crankshaft and aligns them for drilling 4 additional dowel pin holes. The jig includes hardware to mount to either the crank or the flywheel to ensure a proper pattern is drilled. The jig can be used on all 200mm flywheels and 1300cc and larger Type 1 based cranks.